Skip to main content

F60 rev2

Start using your keyboard​

Connect a USB data cable and test typing first; a firmware update is not required for normal use.

VIA JSON and DESIGN · DFU / UF2 flashing · Downloads

Product relationship​

The F60 series is a bare-PCB product line with no separate keyboard layer. F60 rev2 is the MX mechanical hot-swap version of the family.

Quick identification​

  • PCB silkscreen: F60 rev2.
  • MCU: STM32F401.
  • Connectivity: USB only (wired).
  • Switches: Cherry MX-compatible mechanical (hot-swap).
  • Flashing: .uf2 + TinyUF2.

Do-not-mix warning​

  • F60 rev2 firmware cannot be mixed with F60 rev1 / rev3 / revM / F60w.
  • rev2 uses TinyUF2 (.uf2), incompatible with rev1's Atmel DFU (.hex).
  • Do not flash the revM magnetic-switch firmware into rev2 (different switch hardware).

Spec summary​

ItemValue
MCUSTM32F401
ConnectivityWired USB
BootloaderTinyUF2
Firmware format.uf2
VIA / VialSupported
LightingVerify on hardware
SwitchesCherry MX-compatible mechanical (hot-swap)
Default layers4 (factory mainly uses layers 1 and 2)

Firmware, VIA JSON definitions, and SHA-256 checksums are available in the Download Center (see Firmware Downloads).

When you need to update firmware​

  1. Download the .uf2 firmware matching F60 rev2.
  2. Enter bootloader (see Wired Flashing).
  3. Copy the .uf2 file to the mounted USB drive.
  4. After auto reboot, test key input and layer switching.

Common features​

Default keymap​

There is an Fn key in the bottom-right corner (MO(1) by default, hold for layer 2). While holding Fn:

  • Number row 1–0 becomes F1–F10.
  • - and = become F11 and F12.
  • W / A / S / D become arrow keys (Up / Left / Down / Right).

Model-specific features​

F60 rev2 has no wireless features. It focuses on hot-swap mechanical switches and convenient UF2 flashing.

Troubleshooting​

Version compatibility​

  • Hardware revision: rev2 (only).
  • Config tools: VIA / Vial.
  • Firmware: QMK / Vial builds for the F60 rev2 target.