F60 rev3

Product relationship

The F60 series is a bare-PCB product line with no separate keyboard layer. F60 rev3 is the higher-performance MCU version of the family.

Quick identification

• PCB silkscreen: F60 rev3.
• MCU: STM32F411.
• Connectivity: USB only (wired).
• Switches: Cherry MX-compatible mechanical.
• Flashing: .uf2 + TinyUF2.

Do-not-mix warning

• F60 rev3 firmware cannot be mixed with F60 rev1 / rev2 / revM / F60w.
• rev3 uses STM32F411, a different MCU from rev2's STM32F401; firmware is not interchangeable.
• Do not flash the revM magnetic-switch firmware into rev3 (different switch hardware).

Spec summary

Item	Value
MCU	STM32F411
Connectivity	Wired USB
Bootloader	TinyUF2
Firmware format	.uf2
VIA / Vial	Supported
Lighting	Verify on hardware
Switches	Cherry MX-compatible mechanical

Recommended firmware download

Firmware, VIA JSON definitions, and SHA-256 checksums are available in the Download Center (see Firmware Downloads).

First use / flashing prerequisites

1. Download the .uf2 firmware matching F60 rev3.
2. Enter bootloader (see Wired Flashing).
3. Copy the .uf2 file to the mounted USB drive.
4. After auto reboot, test key input and layer switching.

Common features

• Flashing: see Wired Flashing (DFU / TinyUF2).
• PCB identification: see Identify Your Keyboard & PCB.

Default keymap

The default keymap provides a standard 60% layout, matching F60 rev2 behavior. Exact Fn-layer placement follows the firmware you flash.

Model-specific features

F60 rev3 has no wireless features. Compared to rev2, the main difference is the higher-performance MCU and matching hardware adjustments (details pending hardware verification).

Troubleshooting

• Flashing failures: see Troubleshooting / USB & bootloader.
• Keys behave incorrectly: confirm you flashed F60 rev3 firmware.

Version compatibility

• Hardware revision: rev3 (only).
• Config tools: VIA / Vial.
• Firmware: QMK / Vial builds for the F60 rev3 target.